> When You Cannot Print Properly > Paper Creases or Curls > Paper Creases
42L7-04F

Paper Creases

A possible cause may be that paper is not loaded properly or appropriate paper is not used. Check the following.

Is paper loaded correctly?

If paper is not loaded below the load limit line or is loaded obliquely, it may crease.  

Are you using paper that has absorbed moisture?

Replace with appropriate paper.  

Does this problem occur when printing on plain paper or thin paper? (MF746Cx / MF744Cdw / MF742Cdw)

Change the setting for <Paper Wrinkle Correction>. The improvement effect is stronger with <Mode 2> than <Mode 1>. First try with <Mode 1>.  
NOTE
Setting a greater improvement effect may result in faded printouts or slower printing speed.

Does this problem occur when printing on envelopes or thin paper? (MF645Cx / MF643Cdw / MF641Cw)

Change the setting of <Paper Wrinkle Correction>. <Mode 1> is effective for envelopes. <Mode 2> provides stronger improvement, and is effective for envelopes and thin paper. First try with <Mode 1>.  
NOTE
When <Mode 1> or <Mode 2> is specified, printed images may be blurry.

Are you using appropriate paper?

Check usable paper, and replace with appropriate paper.