> Faxing > Sending a Fax to a Destination that Was Specified Before
6RWH-083

Sending a Fax to a Destination that Was Specified Before

How to specify the destination from the send log and send a fax to it is described here.
1
Place the original in the feeder or on the platen glass.
2
Select <Fax> in the Home screen.
If a login screen appears,
3
Select <Reset>.
If the destinations set by the previous user are still selected, it can cause a transmission error. Always reset the settings before sending.
4
Select <Recall Settings> in the <Specify Destination> tab.
If the send log is not displayed,
5
Select the destination.
If the previous send entry in the log was to multiple destinations, only the first destination is displayed in the log, but selecting the entry specifies all the destinations.
The selected destination and the scan settings used the previous time are specified.
To delete destinations,
6
Specify the scan settings if necessary.
7
Select <Start>.
When the <Confirm Destination> screen is displayed, check that the destinations are correct and select <Start Scanning>.
The scan starts.
If the original is placed in the feeder
When the scan is complete, the faxes are sent.
If the original is placed on the platen glass,
When the scan is complete, perform the following.