> When Images like These Are Output > When Marks that are Made through Paper Conveyance Remain > Streaks Like Dents Appear on the Tail Edge Side
43XC-051

Streaks Like Dents Appear on the Tail Edge Side

The speed of paper conveyance is not suitable. Check the solutions below.
← Feeding Direction
Remedy
To improve this situation, adjust each value of the following four items toward the minus end equally.
<Adj. Tandem Area Ppr. Conv.>
<Ppr. Convey. in 2nd Fix Area>
<Ppr. Convey. in Bypass Area>
<Ppr Convey in Inv/Outp Area>
IMPORTANT
This function may affect how paper is fed. Since increasing the value to a great extent may cause paper jams, we recommend adjusting the values in small increments.
Press  → [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the type of paper you are using that is having this problem → press [Details/Edit] → [Change] for the four items that need adjustment to adjust each value toward the minus end equally.
 "Paper Type Management" > "Paper Conveyance Adjustment" in the User's Guide > see the following sections
"Adjusting Speed of Paper Conveyance in Tandem Area"
"Adjusting Speed of Paper Conveyance in 2nd Fixation Area"
"Adjusting Speed of Paper Conveyance in Bypass Area"
"Adjusting Speed of Paper Conveyance in Invert/Output Area"