> Paper Output Problems > How to Align Printouts
4WK8-013

How to Align Printouts

If printouts are misaligned or the edges of printouts are folded on the output trays of the finisher, follow the procedures below to solve the problem.
1
Press  → [Adjustment/Maintenance] → [Adjust Action] → [Finisher Tray A Alignment Adjustment] or [Finisher Tray B Alignment Adjustment].
 "Adjustment for Image Quality and Finishing (Calibration)" > "Adjust Action" > "Paper Alignment on Finisher Tray A/B/C" in the User's Guide
2
Press [-] or [+] to adjust the paper alignment.
If the edges of printouts are folded
Press [-] to increase the width for aligning printouts.
If printouts are misaligned
Press [+] to decrease the width for aligning printouts.
NOTE
If you set [Staple] in the finishing mode, the adjustments in [Finisher Tray A Alignment Adjustment] and [Finisher Tray B Alignment Adjustment] are disabled.
Depending on the finisher you are using, the function mentioned above may not be available.
How to Align Thin Paper