518K-01S

[macOS] Tidak boleh mendaftarkan peranti yang bersambung melalui Bonjour

If the device is not displayed in the [Add] dialog for printers when registering a device connected via Bonjour to macOS, the network settings or installed driver may not be correct.

Check the following to resolve the problem.

NOTA

Screens and operations may differ, depending on the environment of your computer and the following conditions.

The device you are using and its settings, firmware version, and option configuration

The driver you are using and its version

Are the network settings of the device correct?

Enable the Bonjour setting on the control panel of the device.

For details, refer to the manual of the device.

Are the network settings of macOS configured correctly?

Follow the procedure below to configure the required items in the network settings of macOS.

Display the [System Preferences] dialog of macOS → click [Network].

Enable the settings of the network you are using on the [Network] panel.

Click the [Finder] icon → click [Finder]

[Preferences] on the menu bar.

Click [General] on the [Finder Preferences] dialog → enable [Connected servers].

Is the driver installed correctly?

Reinstall the driver and register the device again.