> When You Cannot Print Properly > Paper Creases or Curls > Paper Curls
514C-03C

Paper Curls

A possible cause may be that appropriate paper is not used. Check the following.

Are you using paper that has absorbed moisture?

Replace with appropriate paper.  
When the current setting of the paper type is <Plain>, change it to <Plain L>.  

Does this problem occur when printing on some types of paper such as plain paper or thin paper?

For the relevant paper source, set <Curl Correction> to <On>.  
NOTE
If you select <On>, it may take longer until printing starts. Also, the printing speed may be slower.
This setting may not be enabled if <On> is selected for certain setting items.  
If the problem persists even after setting <Curl Correction>, set <Curl Correction 2> to <On>.  
NOTE
If you select <On>, the print speed may be slower. Also, printouts may be faded.

Are you using appropriate paper?

Check usable paper, and replace with appropriate paper. Also, specify the paper size and type settings properly.
 
 
 
Turn over the paper (front to back) so that the print side is changed, and then reload the paper.
IMPORTANT
Rarely, the symptoms may worsen depending on the type of paper you are using. In that case, get the print side back to original.