85CR-02F
Thin Lines Like Pressing Marks or Crease-Like Marks Appear on the Tail Edge Side
The speed of paper conveyance is not suitable. Check the solutions below.
Thin lines like pressing marks appear on the tail edge side.
← Feeding Direction
Crease-like marks appear on the tail edge side.
← Feeding Direction
Remedy
To improve this situation, adjust the value of the following three items toward the plus end little by little.
<Adjust Fixing Speed>
<Adj. Paper Convey. in Cooling Area>
<Adj. Ppr. Convey. in Inv./Outp. Area>
IMPORTANT
This function may affect how paper is fed. Since increasing the value to a great extent may cause paper jams, we recommend adjusting the values in small increments.
Press 
→ [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the type of paper you are using that is having this problem → press [Details/Edit] → [Change] for the three items that need adjustment to adjust each value toward the plus end little by little.
→ [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the type of paper you are using that is having this problem → press [Details/Edit] → [Change] for the three items that need adjustment to adjust each value toward the plus end little by little.
"Paper Type Management Settings" in the User's Guide > see the following items under the subsection "Items that can be specified""Adjust Fixing Speed"
"Adj. Paper Convey. in Cooling Area"
"Adj. Ppr. Convey. in Inv./Outp. Area"