85CR-02Y

When Printing on Thin Paper, Streaks Appear Parallel to the Feeding Direction as if the Paper was Folded

Change the settings of the machine according to the paper characteristics to improve this situation. Use the following adjustment procedures. The procedures may work when the streaks appear in the area within 120 mm from the center line of the paper.

← Feeding Direction

Remedy

IMPORTANT

Do not allow anyone to change the settings below except for the system manager. For more information on changing the settings, contact your local authorized Canon dealer.

First try the procedure (1) to change the adjustment settings. If the problem does not improve, try the procedure (2). If the problem still does not improve, try the procedure (3).

(1)	→ [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the type of paper you are using that is having this problem → press [Details/Edit] → [Change] for <Adjust Gloss/Fine Black> → set the value of [Gloss] to [-1]. "Paper Type Management Settings" in the User's Guide > see "Adjust Gloss/Fine Black" under the subsection "Items that can be specified". → [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the type of paper you are using that is having this problem → press [Details/Edit] → [Change] for <Adjust Temp. to Prevent Wrinkles> → set the value to [+1]. "Paper Type Management Settings" > "Changing the Wrinkle Correction Level" in the User's Guide.
(2)	→ [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the type of paper you are using that is having this problem → press [Details/Edit] → [Change] for <Adjust Paper Curve> → set the value to [-2] or [-3]. "Paper Type Management Settings" in the User's Guide > see "Adjust Paper Curve" under the subsection "Items that can be specified".
(3)	→ [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the type of paper you are using that is having this problem → press [Details/Edit] → [Change] for <Adjust Temp. to Prevent Wrinkles> → set the value to [+2]. "Paper Type Management Settings" > "Changing the Wrinkle Correction Level" in the User's Guide.