97Y4-052
Streaks Like Pressing Marks Appear on the Tail Edge Side
The speed of paper conveyance is not suitable. Check the solutions below.
← Feeding Direction
Remedy
To improve this situation, adjust the speed of paper conveyance in the invert/output area toward the minus end.
IMPORTANT
This function may affect how paper is fed. Since increasing the value to a great extent may cause paper jams, we recommend adjusting the values in small increments.
Press 
→ [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the type of paper you are using that is having this problem → press [Details/Edit] → [Change] for [Adjust Paper Conveyance] to adjust the correction level with [-] or [+] for [Inversion/Output Area].
→ [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the type of paper you are using that is having this problem → press [Details/Edit] → [Change] for [Adjust Paper Conveyance] to adjust the correction level with [-] or [+] for [Inversion/Output Area].
"Paper Type Management Settings" > "Paper Conveyance Adjustment" > in the User's Guide