9810-03F
Density level of the image appears different on the tail edge of paper
Paper feeding speed at the secondary transfer section is inappropriate.
← Feeding Direction
Remedy
Decreasing the paper realignment speed may improve the situation.
[Coated Paper with Low Basis Weight]
Increasing the paper realignment speed may improve the situation.
Increase the speed by: Press
→ [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the problematic paper type → [Details/Edit] → [Change] for <Adjust Paper Conveyance> → [Registration Area] .
Decreasing the fixing speed may improve the situation.
Decrease the speed by: Press
→ [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the problematic paper type → [Details/Edit] → [Change] for <Adjust Paper Conveyance> → [Fixing Area] .
[Thick Paper with High Strength]
Increasing the fixing speed may improve the situation.
Increase the speed by: Press
→ [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the problematic paper type → [Details/Edit] → [Change] for <Adjust Paper Conveyance> → [Fixing Area] .
"Paper Type Management Settings" > "Adjusting Speed of Paper Conveyance" in the User's Guide