9513-01S
"The memory is full." Appears on the Display (Screen), and the Operation Could Not Be Performed
The operation could not be continued because the memory is full. Check the following for the causes and solutions.
Could not send a fax or scan because memory was insufficient.
If there are documents waiting to be sent or printed, wait until the machine finishes processing them.
If there are received documents stored in memory, print or delete them.
To send a document with a large number of pages, split the original before sending it.
To send a fax, lower the resolution for scanning the original.
When sending a fax, select <Resolution> on the <TX/RX Settings> tab, and then select a resolution lower than the specified resolution. Resolutions,  <200 x 100 dpi (Normal)> (Setting at time of purchase) <200 x 200 dpi (Fine)> <200 x 200 dpi (Photo)> <200 x 400 dpi (Superfine)> <400 x 400 dpi (Ultrafine)> |
When scanning, change the file format to a smaller file size.