Relocating the Machine

See "Attention (Relocating the Machine)" in advance.
Follow the steps in the procedure below to relocate the machine somewhere else for maintenance and other purposes.
1
Turn OFF the machine and all the computers connected to the machine.
2
Disconnect all cables and the power cord from the machine.
How to remove the cables and power cord
USB cable
(1)
Remove it from the machine.
Power cord
(2)
Unplug the power plug from the AC power outlet.
(3)
Remove it from the machine.
3
Fold the paper stopper and push the output tray extension into the machine.
NOTE
When paper is left in the output tray
Remove the paper from the output tray.
4
Remove the paper stack from the paper cassette.
NOTE
When the front paper guide is pulled out from the paper cassette
Push the guide into the paper cassette.
5
Lower the dust cover.
6
Close the paper cassette.
7
Relocate the machine.
Make sure that all the covers and trays are closed and hold the lift handles with the front side of the machine facing you.
Check the weight of the machine before lifting, carrying, and relocating it.
"Machine Specifications"
8
Carefully set the machine down at the new installation site.
NOTE
When reinstalling the machine
See the Starter Guide that comes with the machine.
When relocating the machine to a far-off place
To prevent damage to the machine when relocating the machine to a far-off place, note the following.
Remove the toner cartridge.
Securely pack the machine in its original box with the original packing materials.
When the original box and packing materials cannot be found, find an appropriate box and packing materials to pack the machine and the parts properly.
85RS-055