Paper Curls

Try one of the following to solve the problem.

<Cause 1> Damp paper is used.

Solution 1
Replace the paper stack with new unopened one.
"Supported Paper Types"
Solution 2
Follow the steps in the procedure below when plain paper (60 to 90 g/m² (16 to 24 lb Bond)) is loaded.
1.
Access the [Page Setup] tab.
2.
Set [Paper Type] to [Plain Paper L].
Solution 3
Change the <Special Mode d> setting from the operation panel.
"Special Mode"

<Cause 2> The paper type loaded is not appropriate.

Solution
Make sure that the number of sheets or the paper type loaded in the paper cassette meets the paper specifications.
"Supported Paper Types"
85RS-044