NOTE
|
In some cases, it may not be possible to resolve the problem with the steps described here.
|
Cause
|
The same startup parameter was specified multiple times when executing an installation with the command line.
|
Remedy
|
Check the startup command and edit it so that the same parameter is not specified multiple times.
|
Cause
|
An incorrect command option was specified in the startup parameters when executing an installation with the command line.
|
Remedy
|
Check the startup command.
|
Cause
|
A parameter not starting with "/" was specified after a startup parameter other than "/qn".
|
Remedy
|
Check the startup command.
|
Cause
|
More than one of "/i", "/x", "/f", and "/fa" was specified in the startup parameters when executing an installation with the command line.
|
Remedy
|
Check the startup command. Only one parameter can be specified to specify the operation mode.
|
Cause
|
The operation mode was not specified when executing an installation with the command line.
|
Remedy
|
"/i" or "/x" must be specified when starting in the silent mode.
|
Cause
|
A startup parameter not supported by the environment was specified when executing an installation with the command line.
|
Remedy
|
Check the environment to install to and edit the startup command.
|
Cause
|
The settings file could not be loaded when starting the installer.
|
Remedy
|
Check the settings file.
|
Cause
|
There is an incorrect format in the definitions in "setup.ini".
|
Remedy
|
Check the content of "setup.ini".
|
Cause
|
The specified detailed parameter file could not be found when starting the installer in the silent mode.
|
Remedy
|
Confirm that the detailed parameter file is in the proscribed location.
Confirm that the name of the file is the same as the file name specified in the command.
Check the detailed parameter file.
|
Cause
|
The format of the detailed parameter file for the silent mode is invalid.
|
Remedy
|
Check the content of the detailed parameter file.
|
Cause
|
You executed a silent installation with the command line with the same version of Desktop already installed.
|
Remedy
|
Check the startup command.
|
Cause
|
The specified language resource file could not be loaded when executing an installation with the command line.
|
Remedy
|
Confirm that the language resource file is in the proscribed location in the folder structure of the installer.
Check the language codes specified in "setup.ini" or the detailed parameter file.
|
Cause
|
The resource file for the language that the user selected or installed could not be loaded.
|
Remedy
|
Confirm that the language resource file is in the proscribed location in the folder structure of the installer.
Confirm that the language resource file exists in the "LangPack" folder in the installation folder of Desktop.
|