Enlarging/Reducing Original Pages

With Document Binder, each page can be enlarged or reduced within the area where the selected printer can print (i.e., valid print area) according to the layout settings that are specified in binder documents.

Note
The setting is saved together with the binder document as the layout setting information of the binder document.

Select [Fit to Printable Area] in [Enlarge/Reduce Original Page] in the [Print Settings] pane.

When you do not enlarge or reduce pages, select [Off].

Note
The valid print area varies depending on the printer selected in [Printer Name]. When selecting [Auto] for the output paper size, selecting [Off] in [Enlarge/Reduce Original Page] and printing, the size selected for each original page automatically may be smaller than the actual page size. In this case, the area that exceeds the output paper size may not be printed. When printing a document by selecting [Off] in [Enlarge/Reduce Original Page], the area being over the valid print area of original page cannot be printed. In addition, the annotations attached on the area being over the valid print area may not be printed correctly. In this case, a warning message is displayed when printing a document or exporting it to a PDF document.

Note

The valid print area varies depending on the printer selected in [Printer Name].

When selecting [Auto] for the output paper size, selecting [Off] in [Enlarge/Reduce Original Page] and printing, the size selected for each original page automatically may be smaller than the actual page size. In this case, the area that exceeds the output paper size may not be printed.

When printing a document by selecting [Off] in [Enlarge/Reduce Original Page], the area being over the valid print area of original page cannot be printed. In addition, the annotations attached on the area being over the valid print area may not be printed correctly.

In this case, a warning message is displayed when printing a document or exporting it to a PDF document.