Specifying the Paper Output Method

You can specify the method for outputting paper from a printer.

Note
You cannot specify the paper output method when the fax driver is selected.

Specify the paper output method in [Finishing].

You can select the following paper output methods.

[Off]	Prints without specifying the paper output method.
[Collate]	Outputs the specified number of sets separately in page order.
[Group]	Outputs the specified number of the same pages together.

Select [Offset] or [Rotate] as necessary.

[Offset]	Outputs the specified number of sets with the position of every other set shifted. Can only be selected when a finisher is attached to the printer.
[Rotate]	Outputs each set with the set rotated by 90 degrees. Can be selected even when a finisher is not attached to the printer.

If you selected [Offset], proceed to Step 3.

If you selected [Rotate], proceed to Step 4.

Note
[Offset] and [Rotate] cannot be selected at the same time.

Specify the number of copies to print in [Number of Copies for Offset].

The sets are output with the position shifted each number of sets specified here.

Click [Finishing Options].

Or, select the [Document] menu > [Finishing Options].

The [Finishing Settings] dialog box is displayed.

Specify the output destination and whether to output the printed side facing down or facing up.

[Paper Output]	Specifies the output destination when printing. The output destination cannot be specified when [Booklet Printing] and [Fold + Saddle Stitch] are selected.
[Face Up/Face Down]	Specifies whether to output the printed side facing down or facing up.
[Printer Default]	Specifies the printed side according to the settings on the control panel of the printer.
[Face Down [Normal Output Order]]	Outputs the printed side facing down.
[Face Up [Reverse Output Order]]	Outputs the printed side facing up.

Note
If you selected [Rotate], you cannot specify whether to output the printed side facing down or facing up in [Face Up/Face Down].