Specifying the Magnification Factor of Document Binder

You can specify the magnification factor for pages displayed in the Preview Pane on the Document Binder screen.

Click

(Zoom) on the Toolbar.

Or, select the [View] menu > [Zoom].

The submenu or the pull-down menu is displayed.

Select the desired magnification factor from the submenu or the pull-down menu.

Note
[Custom] is not displayed in the Toolbar pull-down menu.

To specify the magnification factor, enter the desired magnification factor into

(Zoom) on the Toolbar, and press the [Enter] key on the keyboard.

The pages are displayed at the specified magnification factor.

Note
You can select from [10%], [25%], [50%], [75%], [100%], [200%], [Whole Page], and [Page Width]. If you select [Whole Page], a single entire page is displayed. If you select [Page Width], the page is displayed so that the width of the page to print is set to width of the window. You can enter the desired magnification factor value directly in units of 1% in (Zoom) in the Toolbar. If you enter a decimal point or a value greater than the upper limit (200%) or smaller than the lower limit (5%), pages are automatically displayed at the available magnification factor closest to the value you specified (numbers after the decimal point will be truncated). When you use a wheel mouse, you can also change the magnification factor by rolling the wheel in the preview area while pressing the [Ctrl] key on the keyboard. Rolling the mouse wheel forward and backward zooms in and out, respectively. You can change the magnification factor in the range from 5 to 200%. However, if a page with a paper size width or height that exceeds 19 inches (482.6 mm) is included, the maximum magnification is limited to less than 200%.

Note

You can select from [10%], [25%], [50%], [75%], [100%], [200%], [Whole Page], and [Page Width].

If you select [Whole Page], a single entire page is displayed.

If you select [Page Width], the page is displayed so that the width of the page to print is set to width of the window.

You can enter the desired magnification factor value directly in units of 1% in

(Zoom) in the Toolbar. If you enter a decimal point or a value greater than the upper limit (200%) or smaller than the lower limit (5%), pages are automatically displayed at the available magnification factor closest to the value you specified (numbers after the decimal point will be truncated).

When you use a wheel mouse, you can also change the magnification factor by rolling the wheel in the preview area while pressing the [Ctrl] key on the keyboard. Rolling the mouse wheel forward and backward zooms in and out, respectively.

You can change the magnification factor in the range from 5 to 200%. However, if a page with a paper size width or height that exceeds 19 inches (482.6 mm) is included, the maximum magnification is limited to less than 200%.