Copy Set Numbering

This mode enables you to print a five-digit copy set number in transparent characters on copies.

You can manually set the start number for printing copy set numbers.

Press [Copy].

Press [Options] → [Copy Set Numbering].

Set the image orientation and position → press [Next].

The orientation types of originals are as follows:

[Portrait]: Portrait refers to an original in vertical orientation: the shorter edges are at the top and bottom of the original.
[Landscape]: Landscape refers to an original in horizontal orientation: the shorter edges are at the left and right of the original.

Press [Full Surface] to print the copy set number repeatedly over the surface of the output.

Press [Numbers in 5 Locations] to select all five print positions.

NOTE
If you set [Number Option] to 'On', [Full Surface] and [Numbers in 5 Locations] are grayed out and cannot be selected. (See "Copy Set Numbering Options.") If you set any two of [Page Numbering], [Copy Set Numbering], [Watermark], or [Print Date] to print in the same position, a confirmation message appears when you press (Start).

Specify the print settings for the copy set numbers.

Select the size of the copy set numbers from the <Size> drop-down list.

NOTE
If you set [Number Option] to 'On', you can set the copy set number size to [10.5 pt], [12.0 pt], or [14.0 pt]. (See "Copy Set Numbering Options.")

Select the colour of the copy set numbers from the <Color> drop-down list.

Press [Light] or [Dark] for <Density> to adjust the density.

Enter the starting number using

(numeric keys).

Press [OK] → [Close].

IMPORTANT
For information on the modes which cannot be set in combination with this mode, see "Unavailable Combination of Functions." Printing performance may not be optimal, depending on the original content and combination of settings.

NOTE
If the copy number has fewer than five digits, the machine copies it as follows: Example: If the copy set number is 10, "00010" is printed.