Scanned Originals Become Dirty (Automatic Feeder Cleaning)
If your originals have black streaks or appear dirty after scanning them through the feeder, perform an automatic feeder cleaning for the rollers of the feeder.
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Adjustment/Maintenance] → [Maintenance] → [Clean Feeder].
3.
Place 10 sheets of blank paper into the feeder → press [Start].
The time it takes to clean the feeder differs depending on the model of the machine you are using.
imageRUNNER ADVANCE C350iF: Approximately 30 seconds
imageRUNNER ADVANCE C250iF: Approximately 45 seconds
Fan the stack of paper well before loading it.
Use normal LTR size paper.
When cleaning is complete, try scanning again.
|
NOTE
|
|
Feeder cleaning cannot be performed while printing.
To cancel feeder cleaning while it is in progress, press [Cancel].
|