FAX MULTI TX REPORT

If a sequential broadcast transmission is performed when [Fax TX Report] is set to On, a Fax Multi TX Report is automatically printed. (See "FAX TX REPORT/FAX ERROR TX REPORT.")
You can also print a Fax Multi TX Report with an image of the sent original attached to it.
If you are using the imageRUNNER ADVANCE C350i/C250i, an optional product is required to use the Fax function. For information on the optional products required to use the Fax function, see "Optional Products Required for Each Function."
The items printed for the report and a description of each item are indicated below.

JOB NO.

The four digit number, that is automatically assigned when the document is accepted for sending, is printed.

DEPT. ID

If Department ID Management is set, the Department ID is printed.

PGS.

The number of pages that were sent is printed.

TX/RX INCOMPLETE

If a transmission is incomplete, the fax number and the name of the destination are printed.

TRANSACTION OK

The fax number and the name of the destination of a completed transmission are printed.

ERROR

If a transmission error occurs, the fax number and the name of the destination are printed.

NOTE
If an image is not attached, <TX IMAGE SET NOT TO DISPLAY> appears below the title.
If it is unclear whether the document was successfully received at the destination, "---" is printed.
0HYA-037