Executing a Flow on the Machine (iW Function Flow)

You can execute a flow you have created on a machine with iW Function Flow installed.
Required Condition
iW Function Flow is installed in the machine you are using.
Users of the machine you are using are managed with the SSO-H authentication system.
Shared folder for file transmission is created on the computer you are using (the folder name must be the same as the login user name).
This section describes how to log in to the machine you are using as 'John', and execute a Personal flow.
The screens may differ, depending on the model of the machine and on attached optional products.
Follow the procedures below.

Executing a Personal Flow

1.
Enter [User Name] and [Password] on the Log In screen of a machine with iW Function Flow installed → press [Log In]
As an example, 'John' is used for [User Name], and 'password' is used for [Password].
The Main Menu screen is displayed.
2.
Place the original on the feeder or the platen glass.
3.
Press [iW Function Flow] on the Main Menu screen.
NOTE
If [iW Function Flow] is not displayed on the Main Menu screen, press []/[Show All]. If [iW Function Flow] is still not displayed even when you press []/[Show All], confirm whether iW Function Flow has been started.
4.
Select [Shared] on the iW Function Flow Basic Features screen → press [Reduce paper size and send].
5.
Check the flow settings → press [Start].
The original is reduced, converted into a PDF, and then sent to the file server.
Check that the PDF was sent to the following folder, as specified in the settings of the Personal flow:
\\file-server\sales\John
NOTE
Before executing the flow, you must create the shared folder, \sales\John in the file server, for the PDF to be sent according to the settings of the Shared flow.
0HYA-21R