Fax RX Report

The Fax RX Report enables you to check whether documents were sent correctly from the sender's machine and received successfully by this machine. A Fax RX Report can be printed automatically after documents are received, and you can also set the machine to print a Fax RX Report only when a reception error occurs.

For information on the optional products required to use this function, see "Optional Products Required for Each Function."

NOTE
Reports can be printed only if A4 (plain, recycled, thin, or colour) is loaded in a paper source whose settings in [Other] in [Paper Drawer Auto Selection On/Off] in [Function Settings] (Settings/Registration) are set to 'On'. However, if [Consider Paper Type] for [Copy] is set to 'On' in [Paper Drawer Auto Selection On/Off], you cannot print from a paper source with color paper specified. (See "Enabling Paper Drawer Auto Selection.")

NOTE

Reports can be printed only if A4 (plain, recycled, thin, or colour) is loaded in a paper source whose settings in [Other] in [Paper Drawer Auto Selection On/Off] in [Function Settings] (Settings/Registration) are set to 'On'. However, if [Consider Paper Type] for [Copy] is set to 'On' in [Paper Drawer Auto Selection On/Off], you cannot print from a paper source with color paper specified. (See "Enabling Paper Drawer Auto Selection.")

Press

(Settings/Registration).

Press [Function Settings] → [Receive/Forward] → [Fax Settings].

Press [Fax RX Report].

Press [For Error Only] or [On].

Press [Off] if you do not want to print the report.

Press [OK].

NOTE
For an example of a Fax RX Report, see "FAX RX REPORT."