Setting SNMPv1

1
Press [] (Menu).
2
Select <Network Settings> using [] or [] and press [OK].
When the system manager ID and system manager PIN are specified
Use the numeric keys to enter the ID and number, and then press [] (Log In/Out).
3
Select <SNMP Settings> using [] or [] and press [OK].
4
Select <SNMPv1 Settings> using [] or [] and press [OK].
5
Specify the SNMP protocol.
When you do not use the SNMPv1 protocol
(1)
Select <Off> using [] or [] and press [OK].
(2)
Press [] (Menu) to close the menu screen.
(3)
Restart the machine.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
When you use the SNMPv1 protocol
(1)
Select <On> using [] or [] and press [OK].
(2)
Select the item to specify using [] or [] and press [OK].
(3)
Specify the SNMP protocol.
<Community Name 1>
Enter the community name 1. (Default Value: public)
<Community Name 2>
Enter the community name 2.
<MIB Access Permission 1>
Specify MIB access authority of the community name 1.
<Read Only>
Reading only is permitted.
<Read/Write>
Both reading and writing are permitted.*
<MIB Access Permission 2>
Specify MIB access authority of the community name 2.
<Read Only>
Reading only is permitted.
<Read/Write>
Both reading and writing are permitted.*
<Dedicated Community Settings>
Specify On/Off and MIB access authority for dedicated communities.
<Off>
Dedicated community is deactivated.
<Read/Write>
Both reading and writing are permitted.*
<Read Only>
Reading only is permitted.
*
When reading/writing is permitted, a user can access this product from a computer on the network and change settings.
(4)
Press [] (Menu) to close the menu screen.
(5)
Restart the machine.
It is necessary to restart the machine to take effect the settings.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
0H1J-0HS