Copying an ID Card

Copy a 2-sided card onto one side of paper.
1
Place a card on the platen glass, and then close the feeder.
Place the card with spacing of 5 mm from the left edge of the platen glass.
Align the center of the card with the arrow mark, as shown below.
To place the card horizontally
To place the card vertically
2
Press [].
3
Select <N on 1> using [] or [] and press [OK].
4
Select <ID Card Copy> using [] or [] and press [OK].
5
Press [] (Start).
Proceed to the next step when the scan is complete.
6
Turn sides.
Place the card with spacing of 5 mm from the left edge of the platen glass.
Align the center of the card with the arrow mark, as shown below.
To place the card horizontally
To place the card vertically
7
Press [] (Start).
0H5S-051