Restricting Sending/Receiving to/from Specific MAC Addresses

Select [Reject] or [Allow] for sending/receiving data to/from this product. You can specify the exception MAC address for [Reject] and [Allow] respectively.
Specify MAC addresses using the Remote UI. You can only choose to enable or disable this feature from the operation panel.
NOTE
When <Wireless LAN> is selected in <Select Wired/Wireless LAN>:
The setting in this section is disabled.
A number of MAC addresses that can be specified
Up to 32 MAC addresses can be specified.

Registering from the Remote UI

1
Start the Remote UI and log on in system manager mode.
2
Click [Settings/Registration].
3
Click [Security Settings] -> [MAC Address Filter].
4
Click [Edit] in the filter which you want to specify.
5
Set the filter.
(1)
Select the [Use Filter] check box.
(2)
Select the [Reject] or [Allow] check box.
[Reject]
Allow accessing only from computers of which addresses specified in [Exception Addresses].
[Allow]
Reject accessing from computers of which addresses specified in [Exception Addresses].
IMPORTANT
When the [Use Filter] check box is selected:
You cannot access from the following MAC addresses. Make sure to enter the correct MAC address.
MAC addresses not specified for [Exception Addresses] in [Reject]
MAC addresses specified for [Exception Addresses] in [Allow]
The machine cannot access the network when the specified MAC address does not exist. When this occurs, initialize security settings to regain access to the network.
6
Specify the MAC address.
(1)
Enter the MAC address.
Enter the MAC address in the format of AABBCCDDEEFF without hyphens.
(2)
Click [Add].
NOTE
To delete registered MAC addresses
(1)
Select the MAC address to delete.
(2)
Click [Delete].
7
Click [OK].
8
Restart the machine.
It is necessary to restart the machine to take effect the settings.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.

Registering from the operation panel

IMPORTANT
When the setup is complete
Restart the machine to take effect the settings.
1
Press [] (Menu).
2
Select <System Settings> using [] or [] and press [OK].
When the system manager ID and system manager PIN are specified
Use the numeric keys to enter the ID and number, and then press [] (Log In/Out).
3
Select <Security Settings> using [] or [] and press [OK].
4
Select <MAC Address Filter> using [] or [] and press [OK].
5
Select <Send Filter> or <Receive Filter> using [] or [] and press [OK].
6
Select <On> using [] or [] and press [OK].
<Off>
MAC address filter is not available.
<On>
MAC address filter is available.
7
Press [] (Menu) to close the menu screen.
8
Restart the machine.
It is necessary to restart the machine to take effect the settings.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
0H5S-0HR