Feeder

Dust and graphite powder may adhere to the roller inside the feeder and cause smudges to appear on printouts. To clean the feeder, perform the following procedure.
1.
Turn OFF the machine, and unplug the power cord from the AC power outlet.
When you turn OFF the machine, data that is waiting to be printed is deleted. Fax documents that were received by using the Memory Reception function, faxes that are waiting to be sent, and reports that are automatically printed after sending and receiving faxes are not deleted.
2.
Open the feeder cover.
MF229dw
 
MF226dn / MF217w / MF216n
 
3.
Wipe roller () inside feeder.
Clean the areas with a well-wrung-out cloth dampened with water. Then, wipe the area with a soft, dry cloth.
MF229dw
 
MF226dn / MF217w / MF216n
 
4.
Gently close the feeder cover.
5.
Reconnect the power cord and turn ON the machine.
0KCY-0CH