Replacing the Staple Case in the Stapler Unit (Staple Finisher-X/Booklet Finisher-X)
Follow the procedure described in this section to replace the staple case in the stapler unit for the optional Staple Finisher-X/Booklet Finisher-X.
1
Open the front cover of the finisher.
2
Pull out the staple cartridge from the stapler unit.
Hold the green tab of the staple cartridge, and pull it out straight toward you.
3
Remove the empty staple case from the staple cartridge.
4
Take out a new staple case from the box.
IMPORTANT:
Remove the seal that holds the staples together after you place the staple case into the staple cartridge.
5
Insert the new staple case.
6
Hold the green tab, and push the staple cartridge back into the stapler unit until it is securely in place.
7
Close the front cover of the finisher.