Paper Jams in the Staple Finisher-X
Check the location of the paper jam on the touch panel display, and remove it. Paper jam locations are indicated by numbers such as F-A1 or F-B1, which are shown in the illustration below. The Staple Finisher-X is optional. Optional Equipment
* Entrance guide
|
Confirm before handlingClose any covers that are open. |
1
Open the front cover of the finisher.
2
If the Puncher Unit-BF or Puncher Unit-BG (for the 230 V machine only) is attached, slide the guide (F-A1) to align it with the mark.
* Slide the guide in or out to align the nearest  with the mark ( ). |
3
Open the guide (F-A2).
4
Check whether paper is jammed.
 | If paper is jammed, gently pull it out in the direction of the arrow.  |
 | Close the guide (F-A2). |
5
Open the guide (F-B1).
6
Check whether paper is jammed.
| If paper is jammed, gently pull it out in the direction of the arrow.  |
| Close the guide (F-B1). |
7
Turn the dial (F-B2) in the direction of the arrow.
8
Check whether paper is jammed in the guide (F-B3).
| Open the guide (F-B3). |
| If paper is jammed, gently pull it out in the direction of the arrow.  |
 | Close the guide (F-B3). |
9
Close the front cover of the finisher.
Continue following the instructions on the screen to proceed with the interrupted operation or continue clearing paper jams.