TCP/IP Network Setup Procedures

To use a TCP/IP network, it is necessary to perform the following procedures.

1.Protocol Settings

Specify the protocol settings. To specify the settings, use one of the following:

The machine's control panel

The Remote UI (via a Web browser)

Canon utilities

2.Setting Up a Computer for Printing/Sending a Fax

Specify the settings of each computer you use for printing or sending a fax. (Optional equipment is required to print or send a fax from a computer. For the equipment needed, see "Optional Equipment and System Requirements.")

3.Setting Up a Computer as a File Server

Specify the settings of the computer receiving data sent from the machine.

IMPORTANT
It is recommended that you consult the administrator for the network you are using when performing the settings in steps 1 and 3. The machine or printing equipment does not come with printer driver software that can be used on a UNIX platform. (Use LPD to set up a printer in UNIX.) As the fax option does not come with fax driver software for the UNIX platform, it is not possible to send a fax from a UNIX platform. If you are using the imagePASS, see the manual provided with the imagePASS. If you are using the imagePASS, some functions are not available with this machine. For details, see the manual provided with the imagePASS. Pre-determined ports must be opened in order to initiate network communication using TCP/IP. The required ports can be opened by selecting [On] for the appropriate [Network] settings in the machine. It is recommended that the settings for any unused functions be set to 'Off'. When a port is opened, it is possible for a third person to gain unauthorized access.

IMPORTANT

It is recommended that you consult the administrator for the network you are using when performing the settings in steps 1 and 3.

The machine or printing equipment does not come with printer driver software that can be used on a UNIX platform. (Use LPD to set up a printer in UNIX.)

As the fax option does not come with fax driver software for the UNIX platform, it is not possible to send a fax from a UNIX platform.

If you are using the imagePASS, see the manual provided with the imagePASS.

If you are using the imagePASS, some functions are not available with this machine. For details, see the manual provided with the imagePASS.

Pre-determined ports must be opened in order to initiate network communication using TCP/IP. The required ports can be opened by selecting [On] for the appropriate [Network] settings in the machine. It is recommended that the settings for any unused functions be set to 'Off'. When a port is opened, it is possible for a third person to gain unauthorized access.