Optional Equipment

1.

If the Booklet Trimmer-D1 is attached to the Booklet Finisher-Q1 PRO, the fore edge of saddle stitched copies can be trimmed for neat output. For more information on the Booklet Trimmer-D1, see the instruction manual of the Booklet Trimmer-D1.

2.

The Staple-P1 can be attached to the Booklet Finisher-Q1 PRO for saddle stitching.

3.

The Booklet Finisher-Q1 PRO is equipped with the following features: Collate, Group, Staple (Corner, Double, Saddle Stitch), and Saddle Fold.

4.

If the Paper Folding Unit-H1 is attached to the Staple Finisher-Q1 PRO or Staple Finisher-Q1 PRO, the paper can be folded in 5 different ways (Z-Fold, Half Fold, C-Fold, Accordion Z-Fold, Double Parallel Fold).

5.

The Professional Puncher Integration Unit-B1 reverses the paper punched by the Professional Puncher-C1 to prevent a paper jam.

6.

The Professional Puncher-C1 punches several types of holes. For more information on the Professional Puncher-C1, see the instruction manual of the Professional Puncher-C1.

7.

If the Document Insertion Unit-K1 is attached, a different type of paper from the body of the document can be inserted for a cover or insert.

8.

You can scan documents such as books, thick originals, thin originals, and transparencies on the platen glass of the Duplex Color Image Reader Unit-G1. A single original can be sent from documents gathered in the feeder attached to the Duplex Color Image Reader Unit-G1.

9.

The large size touch panel display enables you to operate the machine more efficiently. You can also adjust the position and angle of the control panel to enable you to see the touch panel display more clearly.

10.

If the POD Deck Lite-A1 is attached, it can provide an additional paper source. The POD Deck Lite-A1 holds up to 3,500 sheets of paper (20 lb bond (80 g/m2)).

11.

The Copy Card Reader-F1 enables Department ID Management to be performed through the use of cards.

12.

The Utility Tray-A2 provides space for placing originals.

13.

If the Paper Deck Unit-C1 is attached, it can provide an additional paper source. The Paper Deck Unit-C1 holds up to 3,500 sheets of paper (20 lb bond (80 g/m2)).

14.

Instead of the Duplex Color Image Reader Unit-G1, you can attach the Printer Cover-B1.

15.

The Puncher Unit-BS1 is equipped with the Hole Punch mode. The Puncher Unit-BS1 can be attached only if the Staple Finisher-Q1 PRO or Booklet Finisher-Q1 PRO is attached.

16.

The Staple-N1 can be attached to the Staple Finisher-Q1 PRO or Booklet Finisher-Q1 PRO for stapling (Corner/Double).

17.

The Staple Finisher-Q1 PRO is equipped with the following features: Collate, Group, Offset, and Staple (Corner and Double).

18.

The Tab Feeding Attachment Kit-B1 can only be attached to Paper Drawer 3 or 4, and holds only tab papers.

1.

If the Inner Booklet Trimmer-A1 is attached to the Booklet Finisher-N1, the Trim mode can be used to trim the edges of the booklet.

2.

The Staple-P1 can be attached to the Booklet Finisher-N1 for saddle stitching.

3.

The Booklet Finisher-N1 is equipped with the following features: Collate, Group, Offset, Staple (Corner/Double/Saddle Stitch), and Saddle Fold.

4.

If the Paper Folding Unit-H1 is attached to the Staple Finisher-N1 or Booklet Finisher-N1, the paper can be folded in 5 different ways (Z-Fold, Half Fold, C-Fold, Accordion Z-Fold, Double Parallel Fold).

5.

The Professional Puncher Integration Unit-B1 reverses the paper punched by the Professional Puncher-C1 to prevent a paper jam.

6.

The Professional Puncher-C1 punches several types of holes. For more information on the Professional Puncher-C1, see the instruction manual of the Professional Puncher-C1.

7.

If the Document Insertion Unit-K1 is attached, a different type of paper from the body of the document can be inserted for a cover or insert.

8.

You can scan documents such as books, thick originals, thin originals, and transparencies on the platen glass of the Duplex Color Image Reader Unit-G1. A single original can be sent from documents gathered in the feeder attached to the Duplex Color Image Reader Unit-G1.

9.

The large size touch panel display enables you to operate the machine more efficiently. You can also adjust the position and angle of the control panel to enable you to see the touch panel display more clearly.

10.

If the POD Deck Lite-A1 is attached, it can provide an additional paper source. The POD Deck Lite-A1 holds up to 3,500 sheets of paper (20 lb bond (80 g/m2)).

11.

The Copy Card Reader-F1 enables Department ID Management to be performed through the use of cards.

12.

The Utility Tray-A2 provides space for placing originals.

13.

If the Paper Deck Unit-C1 is attached, it can provide an additional paper source. The Paper Deck Unit-C1 holds up to 3,500 sheets of paper (20 lb bond (80 g/m2)).

14.

Instead of the Duplex Color Image Reader Unit-G1, you can attach the Printer Cover-B1.

15.

The Puncher Unit-BF1 is equipped with the Hole Punch mode. The Puncher Unit-BF1 can be attached only if the Staple Finisher-N1 or Booklet Finisher-N1 is attached.

16.

The Staple-N1 can be attached to the Staple Finisher-N1 or Booklet Finisher-N1 for stapling (Corner/Double).

17.

The Staple Finisher-N1 is equipped with the following features: Collate, Group, Offset, and Staple (Corner/Double).

18.

The Tab Feeding Attachment Kit-B1 can only be attached to Paper Drawer 3 or 4, and holds only tab papers.