1.
|
Booklet Trimmer-D1
If the Booklet Trimmer-D1 is attached to the Booklet Finisher-Q1 PRO, the fore edge of saddle stitched copies can be trimmed for neat output. For more information on the Booklet Trimmer-D1, see the instruction manual of the Booklet Trimmer-D1.
|
2.
|
Staple-P1
The Staple-P1 can be attached to the Booklet Finisher-Q1 PRO for saddle stitching.
|
3.
|
Booklet Finisher-Q1 PRO
The Booklet Finisher-Q1 PRO is equipped with the following features: Collate, Group, Staple (Corner, Double, Saddle Stitch), and Saddle Fold.
|
4.
|
Paper Folding Unit-H1
If the Paper Folding Unit-H1 is attached to the Staple Finisher-Q1 PRO or Staple Finisher-Q1 PRO, the paper can be folded in 5 different ways (Z-Fold, Half Fold, C-Fold, Accordion Z-Fold, Double Parallel Fold).
|
5.
|
Professional Puncher Integration Unit-B1
The Professional Puncher Integration Unit-B1 reverses the paper punched by the Professional Puncher-C1 to prevent a paper jam.
|
6.
|
Professional Puncher-C1
The Professional Puncher-C1 punches several types of holes. For more information on the Professional Puncher-C1, see the instruction manual of the Professional Puncher-C1.
|
7.
|
Document Insertion Unit-K1
If the Document Insertion Unit-K1 is attached, a different type of paper from the body of the document can be inserted for a cover or insert.
|
8.
|
Duplex Color Image Reader Unit-G1
You can scan documents such as books, thick originals, thin originals, and transparencies on the platen glass of the Duplex Color Image Reader Unit-G1. A single original can be sent from documents gathered in the feeder attached to the Duplex Color Image Reader Unit-G1.
|
9.
|
POD Deck Lite-A1
If the POD Deck Lite-A1 is attached, it can provide an additional paper source. The POD Deck Lite-A1 holds up to 3,500 sheets of paper (80 g/m2).
|
10.
|
Copy Card Reader-F1
The Copy Card Reader-F1 enables Department ID Management to be performed through the use of cards.
|
11.
|
Utility Tray-A2
The Utility Tray-A2 provides space for placing originals.
|
12.
|
Paper Deck Unit-C1
If the Paper Deck Unit-C1 is attached, it can provide an additional paper source. The Paper Deck Unit-C1 holds up to 3,500 sheets of paper (80 g/m2).
|
13.
|
Printer Cover-B1
Instead of the Duplex Color Image Reader Unit-G1, you can attach the Printer Cover-B1.
|
14.
|
Puncher Unit-BT1/Puncher Unit-BU1
The Puncher Unit-BT1 or Puncher Unit-BU1 is equipped with the Hole Punch mode. The Puncher Unit-BT1 or Puncher Unit-BU1 can be attached only if the Staple Finisher-Q1 PRO or Booklet Finisher-Q1 PRO is attached.
|
15.
|
Staple-N1
The Staple-N1 can be attached to the Staple Finisher-Q1 PRO or Booklet Finisher-Q1 PRO for stapling (Corner/Double).
|
16.
|
Staple Finisher-Q1 PRO
The Staple Finisher-Q1 PRO is equipped with the following features: Collate, Group, Offset, and Staple (Corner and Double).
|
17.
|
Tab Feeding Attachment Kit-B1
The Tab Feeding Attachment Kit-B1 can only be attached to Paper Drawer 3 or 4, and holds only tab papers.
|
1.
|
Inner Booklet Trimmer-A1
If the Inner Booklet Trimmer-A1 is attached to the Booklet Finisher-N1, the Trim mode can be used to trim the edges of the booklet.
|
2.
|
Staple-P1
The Staple-P1 can be attached to the Booklet Finisher-N1 for saddle stitching.
|
3.
|
Booklet Finisher-N1
The Booklet Finisher-N1 is equipped with the following features: Collate, Group, Offset, Staple (Corner/Double/Saddle Stitch), and Saddle Fold.
|
4.
|
Paper Folding Unit-H1
If the Paper Folding Unit-H1 is attached to the Staple Finisher-N1 or Booklet Finisher-N1, the paper can be folded in 5 different ways (Z-Fold, Half Fold, C-Fold, Accordion Z-Fold, Double Parallel Fold).
|
5.
|
Professional Puncher Integration Unit-B1
The Professional Puncher Integration Unit-B1 reverses the paper punched by the Professional Puncher-C1 to prevent a paper jam.
|
6.
|
Professional Puncher-C1
The Professional Puncher-C1 punches several types of holes. For more information on the Professional Puncher-C1, see the instruction manual of the Professional Puncher-C1.
|
7.
|
Document Insertion Unit-K1
If the Document Insertion Unit-K1 is attached, a different type of paper from the body of the document can be inserted for a cover or insert.
|
8.
|
Duplex Color Image Reader Unit-G1
You can scan documents such as books, thick originals, thin originals, and transparencies on the platen glass of the Duplex Color Image Reader Unit-G1. A single original can be sent from documents gathered in the feeder attached to the Duplex Color Image Reader Unit-G1.
|
9.
|
POD Deck Lite-A1
If the POD Deck Lite-A1 is attached, it can provide an additional paper source. The POD Deck Lite-A1 holds up to 3,500 sheets of paper (80 g/m2).
|
10.
|
Copy Card Reader-F1
The Copy Card Reader-F1 enables Department ID Management to be performed through the use of cards.
|
11.
|
Utility Tray-A2
The Utility Tray-A2 provides space for placing originals.
|
12.
|
Paper Deck Unit-C1
If the Paper Deck Unit-C1 is attached, it can provide an additional paper source. The Paper Deck Unit-C1 holds up to 3,500 sheets of paper (80 g/m2).
|
13.
|
Printer Cover-B1
Instead of the Duplex Color Image Reader Unit-G1, you can attach the Printer Cover-B1.
|
14.
|
Puncher Unit-BG1/Puncher Unit-BH1
The Puncher Unit-BG1 or Puncher Unit-BH1 is equipped with the Hole Punch mode. The Puncher Unit-BG1 or Puncher Unit-BH1 can be attached only if the Staple Finisher-N1 or Booklet Finisher-N1 is attached.
|
15.
|
Staple-N1
The Staple-N1 can be attached to the Staple Finisher-N1 or Booklet Finisher-N1 for stapling (Corner/Double).
|
16.
|
Staple Finisher-N1
The Staple Finisher-N1 is equipped with the following features: Collate, Group, Offset, and Staple (Corner/Double).
|
17.
|
Tab Feeding Attachment Kit-B1
The Tab Feeding Attachment Kit-B1 can only be attached to Paper Drawer 3 or 4, and holds only tab papers.
|