Output Tray Designation

You can designate which output tray to use for specific functions.

The output trays indicated by Tray A, B, and C vary according to the attached optional products.

This mode can be set when one of the Staple Finisher-Q1 PRO, Booklet Finisher-Q1 PRO, Staple Finisher-N1, or Booklet Finisher-N1 is attached. (See "Staple Finisher-Q1 PRO/Booklet Finisher-Q1 PRO/Puncher Unit-BT1/Puncher Unit-BU1" or "Staple Finisher-N1/Booklet Finisher-N1/Puncher Unit-BG1/Puncher Unit-BH1/Inner Booklet Trimmer-A1.")

Options Attached	Default Setting	Tray A/B/C
Staple Finisher-Q1 PRO	Tray A: 1 Copy, 1 Access Stored Files, 1 Printer, 1 Receive, 1 Fax, 1 Other Tray B: 2 Copy, 2 Access Stored Files, 2 Printer, 2 Receive, 2 Fax, 2 Other
Booklet Finisher-Q1 PRO	Tray A: 1 Copy, 1 Access Stored Files, 1 Printer, 1 Receive, 1 Fax, 1 Other Tray B: 2 Copy, 2 Access Stored Files, 2 Printer, 2 Receive, 2 Fax, 2 Other
Staple Finisher-N1	Tray A: 1 Copy, 1 Access Stored Files, 1 Printer Tray B: 1 Receive, 1 Fax, 1 Other Tray C: 2 Copy, 2 Access Stored Files, 2 Printer
Booklet Finisher-N1	Tray A: 1 Copy, 1 Access Stored Files, 1 Printer Tray B: 1 Receive, 1 Fax, 1 Other Tray C: 2 Copy, 2 Access Stored Files, 2 Printer

NOTE
If you are using the staple mode when the Staple Finisher-Q1 PRO or Booklet Finisher-Q1 PRO is attached, you cannot output paper to Tray A.

Press

Press [Function Settings] → [Common] → [Paper Output Settings].

Press [Output Tray Settings].

Set the output and priority settings for Tray A/B/C → press [OK].

[Fax] is displayed only if the fax board is installed.

[Other] is used for setting the priority for printing reports.

If the Super G3 2nd Line Fax Board is installed, you can set up to two fax lines (Fax Line 1 to 2).

If you want to use an output tray for only one function, select only that function.

To set the tray home position when the Staple Finisher-N1 or Booklet Finisher-N1 is attached, select the tray home position to be used while jobs are being processed from the <Tray Home Position> drop-down list.

Details of each item are shown below:
[Tray A]:	Tray A moves closer to the output area.
[Tray B]:	Tray B moves closer to the output area.
[Tray C]:	Tray C moves closer to the output area.
[Off]:	The tray home position is not set. The output tray stops at the position it is in when printing finishes.

IMPORTANT
If a certain tray reaches its stacking limit, the machine automatically uses another tray that is designated for the same function. However, it is recommended that you only designate one tray for fax/I-fax documents to prevent them from getting lost.

NOTE
You can designate an output tray for multiple functions. The priority order of the output destinations is determined by the order of the selected output trays. The priority is displayed as "1," "2," and "3." Paper size which can be output to the output tray differs, depending on the finisher attached to the machine. For more information, see "Paper Sizes that can be Output (Staple Finisher-Q1 PRO/Booklet Finisher-Q1 PRO)" or "Paper Sizes that can be Output (Staple Finisher-N1/Booklet Finisher-N1)."

NOTE

You can designate an output tray for multiple functions.

The priority order of the output destinations is determined by the order of the selected output trays. The priority is displayed as "1," "2," and "3."

Paper size which can be output to the output tray differs, depending on the finisher attached to the machine. For more information, see "Paper Sizes that can be Output (Staple Finisher-Q1 PRO/Booklet Finisher-Q1 PRO)" or "Paper Sizes that can be Output (Staple Finisher-N1/Booklet Finisher-N1)."