on the control panel. (See "Switching Modes Activated After Pressing Energy Saver Key.")Change Energy Saver Mode
If [Energy Saver Mode] is set in [Mode After Energy Saver Key Pressed], you can set the machine to enter the Energy Saver mode by pressing on the control panel. (See "Switching Modes Activated After Pressing Energy Saver Key.")
on the control panel. (See "Switching Modes Activated After Pressing Energy Saver Key.")The Energy Saver mode conserves energy by lowering the temperature of the fixing unit when the machine is not used for a prolonged period of time. To reactivate the machine, press again.
again.|
Energy Saving level
|
Recovery Time
|
|
-10%
|
Approximately 20 seconds
|
|
-25%
|
Approximately 30 seconds
|
|
-50%
|
Approximately 40 seconds
|
|
Zero Restore Time
|
Approximately 0 seconds
|
|
IMPORTANT
|
|
After deactivating the Energy Saver mode, the machine's recovery time may vary, depending on the energy saving level setting and the surrounding environment (i.e., temperature, humidity, etc.).
|
1.
Press 
.
.2.
Press [Preferences] → [Timer/Energy Settings] → [Change Energy Saver Mode].
3.
Select the desired energy saving level → press [OK].
If you want to be able to copy or print immediately, select [Zero Restore Time] (0%).