Puncher Unit Roller Cleaning
If dirt appears on printed output, the roller of the Professional Puncher-C1 may be dirty. In this case, clean the puncher unit roller.
|
IMPORTANT
|
|
You need paper to clean the puncher unit roller. Before starting roller cleaning, make sure that A4 paper (Plain, Heavy 1, or Heavy 2) is loaded into the multi-purpose tray.
|
|
NOTE
|
|
This procedure is necessary only if the Professional Puncher-C1 is attached.
Puncher unit roller cleaning cannot be performed during printing.
|
1.
Press 
.
.2.
Press [Adjustment/Maintenance] → [Maintenance] → [Clean Puncher Unit Roller].
3.
Press [Start].
It takes approximately 2 minutes to clean the puncher unit roller.
When cleaning is complete, try printing again.