Inside the Front Cover
Follow the touch panel display, to remove the jammed paper.
|
NOTE
|
|
The following illustration indicates the location of the paper jam. Please refer to it to remove the jammed paper.
 *Front Cover
|
1.
Open the front cover of the finisher.
2.
Slide the guide (F-A1) to align it with the mark.
Slide the guide once to align 
with 
.
with .|
NOTE
|
|
This procedure is not necessary only if the Puncher Unit-BF1 or Puncher Unit-BG1 is attached.
|
3.
Open the guide (F-B1).
4.
Remove any jammed paper.
 CAUTION |
|
When closing the guide, be careful not to get your fingers caught, as this may result in personal injury.
|
5.
Open the guide (F-B2).
6.
Remove any jammed paper.
|
CAUTION |
|
When closing the guide, be careful not to get your fingers caught, as this may result in personal injury.
|
7.
Turn the lower dial (F-B3) in the direction of the arrow (counterclockwise).
8.
Remove any jammed paper from the guide (F-B4).
|
CAUTION |
|
When closing the guide, be careful not to get your fingers caught, as this may result in personal injury.
|
9.
Close the front cover of the finisher.
|
CAUTION |
|
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
|
10.
Follow the instructions on the screen.
|
NOTE
|
|
The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper jam is cleared.
|