Speed/Precision Priority for Double Staple
You can set whether to give priority to the double stapling speed or to precision.
This mode can be set when the Finisher-AM1 or Saddle Finisher-AM2 is attached. (See "Finisher-AM1/Saddle Finisher-AM2/Puncher Unit-BS1/Puncher Unit-BT1.")
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Adjustment/Maintenance] → [Adjust Action] → [Speed/Precision Priority for Double Staple].
3.
Select [Speed Priority] or [Precision Priority] → press [OK].
|
[Speed Priority]:
|
Priority is given to the double stapling speed. The precision for the double stapling is decreased.
|
|
[Precision Priority]:
|
Priority is given to the double stapling precision. The production speed is decreased.
|
|
IMPORTANT
|
|
The [Speed/Precision Priority for Double Staple] function is enabled only when using the following paper:
Paper size: The width for the feeding direction is from 7 1/8" to 8 1/2" (182 mm to 215.9 mm)
Paper type: Thin 1, Plain 1 to 2, Heavy 1, Colour 1 to 2, Recycled 1 to 3, Pre-Punched 1 to 2
Paper weight: 17 lb bond to 32 lb bond (64 g/m2 to 128 g/m2)
If you select [Speed Priority], stapled output paper may not be aligned due to the temperature, humidity, or characteristics of the paper type.
|