Output Paper Becomes Dirty (Wire Cleaning)
If streaks appear on printed output or random parts of the printed image are missing, clean the corona assembly wires inside the main unit.
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Adjustment/Maintenance] → [Maintenance] → [Clean Wire].
3.
Press [Start].
It takes approximately 20 seconds to clean the wire.
When cleaning is complete, try printing again.
|
IMPORTANT
|
|
Do not turn the main power switch OFF or open the front covers while the machine is cleaning the wire.
|
|
NOTE
|
|
Wire cleaning cannot be performed during printing.
|