Sending with a Subaddress
If the destination fax machine is compatible with ITU-T (International Telecommunications Union-Telecommunications Sector) standard subaddresses and passwords, you can send documents with increased security by attaching a subaddress and a password to all of your fax transactions.
1.
Press 
→ [Fax].
→ [Fax].
2.
Enter the fax number → press [Subaddress].
If you have added additional lines, press [Set Details].
For instructions on performing this operation from the Fax screen, see "Fax Basic Features Screen."
|
IMPORTANT
|
|
You cannot insert a pause at the beginning of a number.
|
|
NOTE
|
|
If you enter a pause at the end of the number, the pause is always 10 seconds long.
You can use multiple lines in the following case:
If [No. of TX Lines] is set to two lines in [Remote Fax TX Settings] when using the Remote Fax function (See "Remote Fax TX Settings.")
|
3.
Press [Subaddress] or [Password].
4.
Enter the subaddress and password using 
- 
(numeric keys), 
, and 
.
- (numeric keys), , and .5.
Press [OK].