Face UP/Face Down Output with External Finisher
You can specify whether to output face up or face down for delivering paper from the High Capacity Stacker-G1 to the external finisher.
This mode can be set if the High Capacity Stacker-G1 and the external finisher are attached.
(See "High Capacity Stacker-G1.")
IMPORTANT
|
This settings for the imagePRESS Server are given priority in this mode.
|
1.
Press
.
2.
Press [Function Settings] → [Common] → [Paper Output Settings].
3.
Press [Face Up/Face Down Output with Extrnl. Fin.].
4.
Select [Face Up] or [Face Down] → press [OK].
Details of each item are shown below.
[Face Up]:
|
Printed sheets are always output face up.
|
[Face Down]:
|
Printed sheets are always output face down.
|