Feeder
Check the location of the paper jam, and follow the procedure described below, while referring to the directions that appear on the touch panel display, to remove the jammed original.
1.
Remove originals from the original supply tray.
2.
Pull the lever, and open the feeder cover.
3.
Remove any jammed original.
If there is difficulty in removing jammed original, do not try to remove it forcibly, and proceed to step 4.
4.
Turn the green tab in the direction of the arrow (counterclockwise), and remove the jammed original from the output tray.
5.
Close the feeder cover.
 CAUTION |
|
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
|
6.
Open the feeder, and remove any jammed paper.
7.
Close the feeder.
|
CAUTION |
|
When closing the feeder, be careful not to get your fingers caught, as this may result in personal injury.
Be aware that the light emitted from the platen glass may be very bright when closing the feeder.
|
8.
Follow the instructions on the screen.
|
NOTE
|
|
The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper jam is cleared.
|