Setting Scheduled Updates

You can set the machine to regularly check for new applicable firmware and automatically update the firmware of the machine.
IMPORTANT
To perform this procedure, you must log in to the machine as an administrator. (See "Logging In to the Machine as an Administrator.")
If scheduled delivery of the firmware is not complete, or the downloaded firmware has not been applied, you cannot perform a scheduled update.

1.
Press  .
2.
Press [Management Settings] → [License/Other] → [Register/Update Software].
3.
Press [Scheduled Update].
4.
Specify each setting → press [OK].
Details of each item are shown below.
<Scheduled Update Settings>:
[On]: Scheduled update is performed.
[Off]: Scheduled update is not performed.
<Update Schedule>:
Confirm: Select the cycle ([Biweekly], [Weekly], or a day ([Sun] to [Sat])) and enter the time using  -  (numeric keys). The time is displayed in 24-hour notation. The firmware check may take up to 3 hours to complete from the specified time.
Apply at: Enter the time to apply downloaded firmware using  -  (numeric keys). The firmware update is applied at the specified time within 24 hours of download completion.
[E-Mail]:
Enter the e-mail address of the administrator. You can receive e-mails regarding the update status that is sent from the delivery server.
[Comments]:
Enter the comment that will automatically be added to the e-mail. If the model name is entered, you can identify which device status the e-mail is about.

NOTE
If previously downloaded firmware has not been applied by scheduled update, the next scheduled update is not performed.
If Scheduled Update is set, a firmware update is applied at the specified time after the new firmware is downloaded from the delivery server. After application is complete, the machine automatically restarts.
07FK-027