Copy Tray-J1
If the Copy Tray-J1 is attached to the machine, the following modes are available:
Collate Mode
The prints are automatically collated into sets arranged in page order before they are delivered to the output tray.
Group Mode
All prints of the same original page are grouped together into sets before they are delivered to the output tray.
Rotate Mode
If originals of the same size are printed, the prints are automatically collated into sets arranged in page order, and are output in alternating directions to the output tray.
Parts and Their Functions
|
1.
|
Output Tray
Prints are output to this tray. |
|
2.
|
Auxiliary Tray
Pull out the auxiliary tray if you are printing on large size paper (A3 or A4R). |
The following are paper sizes that can be output from the output trays of the machine. However, some paper sizes may not be output depending on the set functions.
: Available-: Unavailable
|
Paper Size
|
Output Tray
|
|
|
305 x 457 mm
|
-
|
|
|
SRA3
|
-
|
|
|
A3
|
|
|
|
A4
|
|
|
|
A4R
|
|
|
|
A5
|
-
|
|
|
A5R
|
|
|
|
Envelope
|
No.10(COM10)
|
-
|
|
Monarch
|
-
|
|
|
DL
|
-
|
|
|
ISO-C5
|
-
|
|
|
Nagagata 3
|
-
|
|
|
Yougatanaga 3
|
-
|
|
|
Kakugata 2
|
-
|
|
|
Custom Size
|
99 mm x 139.7 mm to 320 mm x 457.2 mm
|
-
|
|
NOTE
|
|
[Rotate 90 Degrees] can be selected only if the machine is not equipped with a finisher.
|