Color Image Reader Unit-F1

Originals placed in the feeder are automatically fed sheet by sheet to the platen glass for scanning. The feeder also automatically turns over two-sided originals to make one or two-sided copies.
CAUTION
Do not insert your fingers into the gaps around the original supply tray, as your fingers may get caught. Also, be careful not to drop objects, such as paper clips into the gaps, as doing so may cause damage to the machine or cause it to break down.
IMPORTANT
When using the platen glass to copy or scan thick originals, such as books or magazines, do not press down hard on the feeder.
If the original output area is blocked, originals may get damaged, and printing may not be performed correctly. Therefore, do not place any objects in the original output area.

Parts and Their Functions

1.
Feeder Cover
Open this cover to remove jammed paper.
2.
Slide Guides
Adjust these guides to match the width of the original.
3.
Original Supply Tray
Originals placed here are automatically fed sheet by sheet into the feeder. Place originals into this tray with the surface that you want to scan face up.
4.
Original Output Area
Originals that have been scanned from the original supply tray are output into the original output area in the order that they are fed into the feeder.
5.
Original Set Indicator
Lights when originals are placed in the original supply tray.
6.
Document Feed Scanning Area
Scans documents sent from the feeder.
7.
Platen Glass
Use the platen glass when scanning books, thick originals, thin originals, transparencies, etc.
08RW-03E