Setting the Printing Priority
A job that has a higher set priority can be set to print after the job currently being processed is complete.
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Function Settings] → [Common] → [Print Settings].
3.
Press [Print Priority].
4.
Select the printing priority → press [OK].
Select [1] for the function that you want to give the highest printing priority.
[Copy] is displayed only if the Duplex Color Image Reader Unit-E1/Color Image Reader Unit-F1/Color Image Reader Unit-F2 is attached.
<Receive/Fax> is displayed only if the fax board is installed.
<Receive> is displayed if the fax board is not installed.
<Other> is used for setting the priority for printing reports.
PDL prints from MEAP applications are included in <Printer>.
|
NOTE
|
|
If the same printing priority has been specified for multiple functions, printing starts with the first processed print job.
|
|
NOTE
|
|
Priority printing does not take place until the current job is complete. However, if the current job is paused, the printing of a job that belongs to a function with a higher set priority may start, depending on the settings.
|