Roller Cleaning
If dirt or streaks appear on printed output, clean the roller inside of the main unit.
|
IMPORTANT
|
|
You need paper to clean the roller. Before starting roller cleaning, make sure that LTR paper is loaded.
|
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Adjustment/Maintenance] → [Maintenance] → [Clean Roller].
3.
Press [Start].
It takes approximately 20 seconds to clean the roller.
When cleaning is complete, try printing again.
|
NOTE
|
|
Roller cleaning cannot be performed during printing.
|