Switching the Colour Mode

You can set the colour mode to use for the scan.

Colour Mode

Auto (Color/Gray)

If you select the Auto (Color/Black) mode, the machine automatically recognizes whether the original is in colour or black-and-white. Colour originals are scanned in the Full Color mode, while black-and-white originals are scanned in the Grayscale mode.

Auto (Color/Black)

Full Color

The Full Color mode always scans in colour regardless of whether the original is in colour or black-and-white.

Grayscale

The machine always scans in grayscale, regardless of whether the original is in colour or black-and-white.

Black & White

The Black & White mode always scans in black-and-white regardless of whether the original is in colour or black-and-white.

Press [Scan and Send] → specify the destination → press the Select Colour button.

Select the desired colour mode → press [OK].

IMPORTANT
When [Auto (Color/Gray)] or [Auto (Color/Black)] is set and your originals contain colour sections, the machine scans them in the Full Color mode. However, the machine may scan the colour originals in the Black mode under the conditions below. To avoid this, set the colour mode to [Full Color]. If the originals contain very few colour sections If the colour sections of the originals are close to black If the originals contain light colour densities If the colour sections are located only in the range indicated by the diagram below, when loading the originals in the feeder

IMPORTANT

When [Auto (Color/Gray)] or [Auto (Color/Black)] is set and your originals contain colour sections, the machine scans them in the Full Color mode. However, the machine may scan the colour originals in the Black mode under the conditions below. To avoid this, set the colour mode to [Full Color].

If the originals contain very few colour sections

If the colour sections of the originals are close to black

If the originals contain light colour densities

If the colour sections are located only in the range indicated by the diagram below, when loading the originals in the feeder

NOTE
You can register a desired colour mode as the default setting by changing the default copy settings. (See "Changing the Default Settings for Send.") If a black-and-white original is scanned in the Full Color mode, it is counted as a colour scan. If you select JPEG as the file format, [Black & White] is changed to [Grayscale]. If you select TIFF as the file format, [Black & White] is set.