Staple Finisher-L1/Booklet Finisher-L1
Check the location of the staple jam, and follow the procedure described below, while referring to the directions that appear on the touch panel display, to remove the jammed staple.
|
IMPORTANT
|
|
Make sure to close all covers and paper drawers of the machine before clearing any staple jams.
|
|
NOTE
|
|
The Staple Finisher-L1 and Booklet Finisher-L1 are optional products.
|
1.
Open the front cover of the finisher.
*1 Booklet Finisher-L1
*2 Staple Finisher-L1
2.
Lift and pull out the staple case from the stapler unit, holding it by the green tab.
3.
Remove any staples jammed in the staple case.
 |
1. Push down the tab on the staple case.
|
2. Remove all of the staples that slide from the staple cartridge. |
|
3. Return the tab on the staple case to its original position. |
4.
Gently push the staple case back into the finisher and push down firmly until it is securely in place.
5.
Close the front cover of the finisher.
 CAUTION |
|
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
|
|
NOTE
|
|
After the cover is closed, the stapler unit may automatically perform a "dry" stapling operation to reposition the staples.
|