Trace & Smooth Settings
You can change the recognition rate of line drawings of the original when creating a file with outline graphics.
For information on the optional products required to use this function, see "Optional Products Required for Each Function (imageRUNNER ADVANCE C9280 PRO)" or "Optional Products Required for Each Function (imageRUNNER ADVANCE C7280i/C7270i/C7260i)."
1.
Press 
.
.2.
Press [Function Settings] → [Common] → [Generate File].
3.
Press [Trace & Smooth Settings].
4.
Select [On] for <Outline Graphics> → specify the settings for <Graphics Recognition Level>.
|
Details of each item are shown below.
|
|
|
<Graphics Recognition Level>:
|
|
|
[Normal]:
|
Sets a standard recognition level. (The data size becomes small.)
|
|
[Moderate]:
|
The recognition level and data size are in between those of [Normal] and [High].
|
|
[High]:
|
Sets the highest recognition level. (The data size becomes large.)
|
|
NOTE
|
|
If you increase <Graphics Recognition Level>, the data size also increases. It is recommended that you first use [Normal], and if desirable results are not obtained, try increasing the recognition level to [Moderate] or [High].
|
You can specify the setting for the image quality level of the background in <Background Image Level>.
|
Details of each item are shown below.
|
|
|
<Background Image Level>:
|
|
|
[Data Size Priority]:
|
The data size is small, but the background image quality is low.
|
|
[Normal]:
|
The data size and background image quality are in between those of [Data Size Priority] and [Quality Priority].
|
|
[Quality Priority]:
|
The data size is large, but the background image quality is high.
|
Select [Off] if you do not want to perform Outline Graphics.
5.
Press [OK].
|
NOTE
|
|
This setting is disabled when sending a fax or I-fax.
|