Auto Shutdown Time
With the Auto Shutdown mode, if the touch panel display of the machine is idle for a certain period of time after it has entered the Sleep mode, the machine automatically shuts down.
|
IMPORTANT
|
|
This mode is not displayed if the fax board is installed. If it is displayed, set [Auto Shutdown Time] to '0', and contact your local authorized Canon dealer.
|
1.
Press 
.
. 2.
Press [Preferences] → [Timer/Energy Settings] → [Auto Shutdown Time].
3.
Press 
or 
to specify the desired Auto Shutdown Time → press [OK].
or to specify the desired Auto Shutdown Time → press [OK]. |
IMPORTANT
|
|
Even when operating the machine from the Remote UI, the machine automatically shuts down if the touch panel display of the machine is idle for a certain period of time. A malfunction may occur particularly if the machine automatically shuts down while importing. Set [Auto Shutdown Time] to '0' when importing data.
|
|
NOTE
|
|
If you select '0', the Auto Shutdown mode is invalid.
Even when the machine is in the Sleep mode, the Auto Shutdown mode is invalid in the following cases:
When the fax board is installed
When the Advanced Space of the machine is being accessed from another imageRUNNER ADVANCE or a computer
When there is a send job
When you are using the Register/Update Software function or firmware update function
|