Matching the Print Side for 1-Sided and 2-Sided Printing

You can print on paper with printed logos while taking into account the print side (front/back) by using [Print Side Priority]. This mode enables you to print the first page of your original on the front side for both 1-sided and 2-sided prints without changing the orientation of the paper.

Printing Example

Paper with Printed Logos		Original
Front Side	Back Side

1-Sided Printing			2-Sided Printing

Prints each page on the front side.			Prints odd numbered pages (first, third, etc.) on the front side.

To achieve the above print results, load paper in the orientations indicated below.

	Printing Method	Paper Source	Paper Load Orientation
When [Speed Priority] is set	1-Sided Printing	Paper Drawer	Front side facing up
	1-Sided Printing	Multi-Purpose Tray	Front side facing down
	2-Sided Printing	Paper Drawer	Front side facing down
	2-Sided Printing	Multi-Purpose Tray	Front side facing up
When [Print Side Priority] is set	1-Sided/2-Sided Printing	Paper Drawer	Front side facing down
When [Print Side Priority] is set	1-Sided/2-Sided Printing	Multi-Purpose Tray	Front side facing up

IMPORTANT
If you select [Print Side Priority] for a paper source, the Automatic Paper Selection and Paper Drawer Auto Selection settings are ignored. Also, the machine's printing speed may become slower when you print one-sided documents. To print using the [Print Side Priority] settings, load the paper indicated below. For other paper, the message <Load paper.> appears and the paper is not fed, or the [Print Side Priority] settings are disabled. If you are using Plain 1, Plain 2, Colour, Recycled, or Heavy 1 paper Paper size: 5 1/2" x 8 1/4" (139.7 x 210 mm), 8 1/2" x 14" (216 x 355.6 mm), LGL, LTR, EXEC, STMT, EXEC Paper weight: 17 lb bond to 28 lb bond (64 to 105 g/m2) If you are using Pre-punched paper Paper type: LGL, LTR, STMT Paper weight: 20 lb bond to 21 lb bond (75 to 80 g/m2)

IMPORTANT

If you select [Print Side Priority] for a paper source, the Automatic Paper Selection and Paper Drawer Auto Selection settings are ignored. Also, the machine's printing speed may become slower when you print one-sided documents.

To print using the [Print Side Priority] settings, load the paper indicated below. For other paper, the message <Load paper.> appears and the paper is not fed, or the [Print Side Priority] settings are disabled.

If you are using Plain 1, Plain 2, Colour, Recycled, or Heavy 1 paper

Paper size: 5 1/2" x 8 1/4" (139.7 x 210 mm), 8 1/2" x 14" (216 x 355.6 mm), LGL, LTR, EXEC, STMT, EXEC

Paper weight: 17 lb bond to 28 lb bond (64 to 105 g/m2)

If you are using Pre-punched paper

Paper type: LGL, LTR, STMT

Paper weight: 20 lb bond to 21 lb bond (75 to 80 g/m2)

Press

(Settings/Registration).

Press [Function Settings] → [Common] → [Paper Feed Settings].

Press [Feed Method Switch].

Press [Print Side Priority] for each paper source → [OK].